The boat will be started only after all the items are inspected.

1. Hull: check for cracks and damage
2. Injection pump water inlet hole: remove all the sundries which might hinder the water inflow,damage the cooling system and propulsion system. Do cleaning if necessary. Check front edges of the impeller, a cracked or distorted will affect the propulsion.
3. Engine compartment: if water is found in the compartment, tilt backward the boat and open the discharge screw cap to drain , then secure the cap.Warning: in the event of oil leaking or peculiar smell, do not start the engine.
4. Battery: check the connections at both poles of the battery for tension and correct connection.
5. Fuel tank and oil tank: Rest the boat horizontally and fill the fuel with specified amount. Check the engine oil level and add the oil if necessary.
6. Compartment: Drain the water, tighten the discharge screw-cap
7. Steering system: with help from another person, check if the steering system works freely. Make sure that the injection pump's nozzle shall rotate accordingly when the steering wheel is rotated.
8. Throttle system: operate to inspect
9. Key switch: operate to inspect
10. Storage box cover: check if it is closed or locked